Battery PoweryMax PowerKit PX25

The PowerKit PX25 consists of the PoweryMax PX25 portable battery, a smart charger, a device connection cable, a pair of waterproof connectors and a heat shrink sleeve.

The PoweryMax PX25 portable battery is the largest of the family of a series of impressive batteries, based on a soul of Lithium Ion cells of the highest quality, under the criteria of maximum efficiency and usability with only 1.6 kg. of weight. This allows you to take it anywhere, giving you greater capacity and more autonomy, possibly the best of its kind.

It is designed and manufactured to power one or more devices in small boats, duck fishing, kayak or catamaran fishing. It is also very useful when practicing outdoor sports in the mountains or on the beach, where you can have enough energy to power your devices for several days. It fits anywhere, due to its size.

Its main characteristics are its lightness, its safety, its durability and that it is waterproof.

All PoweryMax batteries are tested and verified in the most demanding conditions, which allows a continuous supply and with a more than proven duration of sports cameras, iPad, tablets, mobiles, probes of any brand, and of any device that require 12v power.

General Description PoweryMax

Its internal cells and protection system are safe from the elements in a completely sealed silicone-based cover and wrapped in a portable case that will allow you to carry it without fear of getting it wet, its wiring is totally watertight thanks to the use of gaskets and threaded connectors.

Measurements (cm): 15 x 7.5 x 11

Weight (gr) 1.6 kg.

Output Voltage (V): 12

Maximum recharge time (h): 6 (depending on the consumption made)

How much autonomy will I have with the PoweryMax PX25? This depends on the energy consumption of your unit or units since due to its greater capacity it allows the connection of more than one device.

Calculating the autonomy is easy, divide the capacity by the consumption of your electronic equipment and you will get the hours of use. Keep in mind to put amps (25ah) or milliamps (25,000mah) to get the calculation right.

It is recommended to use a protection fuse before connecting the device and to fully charge the PoweryMax PX25 before use, as well as not leaving it fully charged if long periods of inactivity are anticipated. The charger can be left in place even after being fully charged, as it has a protection system, but it is not recommended to leave it in place during long periods of inactivity

Cleaning the connectors after use is recommended, especially in salt water, is all that must be taken into account!

Recommendations PoweryMax

PRE-ASSEMBLY INDICATIONS:

Your device must be compatible with the Power Kit Battery specifications

Note the polarity, RED (+) and BLACK (-)

The Power Kit Battery must be fully charged before using it for the first time.

MOUNTING

1. Cut the heat-shrink strip approx in the center and first pass each of the

cables through it leaving enough cable to work comfortably.

2. Our connection cable is pre-stripped, leaving part of the end unsheathed.

do the same with the cable of the device to be connected in approximately the same

length, winding the wire strands to prevent part from coming out when inserted into

the splice connector.

3. Be clear about which cable is positive (+) and negative (-) of the device before proceeding to the

next point, usually BLACK is (-) and RED (+)

4. Put the stripped end of the wire on each end of the splice connector.

ensuring that the central metal internal part touches the ends of both cables, using

some pliers tighten this central metal part leaving the cables fixed to it, once

done the first one, repeat the operation with the other cable.

5. Pass a heat source (a simple lighter is sufficient) from the center to the outside of the

uniform shape on each of the splice connectors until the tube conforms to the

cable and wait for it to cool down before proceeding to the next step.

6. Put the piece of heat shrink covering the connector completely and apply heat again

to this second layer of protection, leaving the joint completely sealed, we avoid entry of

moisture that would shorten the life of our Power Battery Kit.

IMPORTANT PRECAUTIONS

Failure to follow the instructions for use or assembly properly can cause damage to the Power Kit Battery, connected equipment or even serious personal injury.

Never use any other charger than the one supplied. (danger of damage and / or fire)

Although the Power Batterty Kit is resistant to humidity, under no circumstances should it be submerged.

The nominal delivery capacity of the Power Battery is 5A with peaks up to 10A. Using for higher consumptions could irreversibly damage the Power Battery Kit and even cause damage or fire.

WARRANTY

PowerKit is guaranteed against manufacturing defects for a period of one year according to the Law of sale of consumer goods 23 of July 10, 2003.

Damages caused by improper use of the product, physical damage or wear and tear are excluded from the warranty.

The durability of this product is calculated at approx 500 charge / discharge cycles.

The use of this product in extreme temperature conditions notably shortens the performance.