Cressi Gara Team 25º MD Carbon Fins

CARBON BLADE

• Pure carbon laminated with the highest quality resin with a 12,000-thread weave

• 100% industrial construction by vacuum infusion at high temperature to eliminate any possibility of microbubbles in the structure and obtain a very compact and reactive blade.

• Tapered profile from a maximum thickness of 3 mm in the area where it fits with the foot pocket, the same as the plastic version, to minimize energy loss due to coupling, down to 1 mm at the tip with 5 different phases

• External cosmetics with a matte finish to avoid unwanted reflections.

• Foot pocket-shovel fitting area, especially delicate in terms of fracture possibilities, with various technologies to minimize risks. Hole for the assembly screws made with a mold, not machined, to minimize the possibility of breakage at this point. Rounded profile in the foot pocket-shovel cancellation area. Elastic inner layer

• Three levels of hardness:

LD: soft hardness for fishermen with reduced wingspan and/or who make long journeys and fish at medium depths

MD: medium hardness, the most versatile version, for medium-sized fishermen who combine movement with fishing of all kinds, even at great depths

HF: medium/high hardness for larger anglers, surf fishers and deep sea fishers, especially with constant weight

 • One-piece rubber profiles with a guide to fix the ribs, lateral protection of the blade and anti-skid flaps.

FOOTPOCKET

New two-material footpocket, specially calibrated to fully enjoy the performance of carbon and the foot-footpocket-blade energy transmission. The ribs reduce the hardness of the compound by 20% compared to the previous version and the soft rubber area of ​​the foot pocket has a firmer composition to improve energy transmission. The new foot pocket combines two materials, a thermoplastic shore 70º rubber, flexible but inelastic and very resistant, applied to the nerves, to the entire sole of the foot pocket and to the exclusive fastening band on the instep intended for immediate transmission of effort. without dissipating into gummy compositions.

The instep incorporates a 2 cm wide "Self adjusting" band in its center, which allows a slight dilation (from 2 to 4 mm depending on size) to adapt to people with high insteps or in case of using thick pumps. The expansion has been carefully calibrated so as not to impair the transmission of energy.

The volume of the foot pocket has been dimensioned after in-depth anatomical studies, in such a way that the volumes are proportional to the widening effect caused by the foot pocket depending on the size of the foot. It does not follow a fixed size-to-size ratio since, proportionally, a small foot "fattens" much more than a large one when putting on booties.

Sizes: 36/37 - 38/39 - 40/41 - 42/43 - 44/45 - 46/47