Regulator Cressi Xs Compact - AC2 Din 300

2ND STAGE XS COMPACT

New monocoque ultra-simplified second stage in ABS + elastomer, very small (6 cm in diameter), very light (145 g) with a mechanism and construction studied to obtain the minimum number of components and a great sturdiness. It is an intelligent purchase option due to its combination of features-reliability-price-maintenance cost, ideal for uses that require maximum reliability and also as a travel regulator given its lightness combined with the 1st stage MC5, for diving centers or as a regulator work with the AC2 and as a high-end set with the MC9.

The specific calibration of the inhalation mechanism slightly changes the personality in air delivery compared to the Ellipse series, to reward, over and above the exquisite touch and sensitivity of these models, an abundant flow without the need for exploit the Venturi effect. This characteristic gives it a low tendency to continuous flow on the surface or during the placement of the equipment in the water, ideal for schools and rentals, octopus and double regulator. The performance results, however, place it above regulators considered to be of a higher range.

Perforation of the asymmetric front cover. The flow of water begins to push the membrane in an anticlockwise direction so that its retraction occurs perfectly flat and the cam descends progressively and in perfect perpendicularity, regardless of the conditions (current, sudden movements, any position of the face, etc.) .

Particularly reduced exhalation effort without the need to reduce the thickness of the membrane. The design of the membrane retention system directs the flow 100% channeled towards the mouthpiece nozzles, benefiting from a powerful Venturi effect that also helps to direct the bubbles away from the diver's field of vision. Embedded membrane to prevent water leaks in case of sharp turns or when jumping from the boat into the water.

Purge button, practically integral, greater between 80 and 400% compared to any other regulator on the market to facilitate the purge maneuver, especially in inexperienced divers.

Lid assembly system by means of a 30º bayonet turn, ensures a very simple and safe assembly-disassembly, even to carry out sand cleaning tasks on the beach and without the need for tools.

Reduced aging due to use thanks to the finish of the casing, the result of applying a new technology in the mold that achieves a nuanced appearance based on a microtexture of rounded profiles.

2nd Characteristics Stage

-Downstream system

- Adjustable Venturi

- Patented low friction lever

- Full width purge button

- Non-slip finish

- Bayonet opening

- Removable technopolymer mustache

- Weight without whip: 135 gr

1st STAGE AC2

1st stage with a simple piston, an economical, simple, reliable and robust work "mule" suitable for intensive use. It is a first stage applauded by diving centers and professional work companies that consider it a very profitable tool due to its low cost and practically no need for maintenance and also with a surprising level of performance.

Conical filter with great filtering capacity, essential to prevent the entry of particles from the bottles. This point is especially important in school or rental regulators.

Air flow rate supplied 2100 l/min with an intermediate pressure drop in intensive breathing (150 bar) 0.5-0.8 bar (Measurements made on an LP outlet with the second stage connected and a pressure of 150 bar in the bottle).

LP external regulation by means of an Alyco key, greatly facilitates the management of revisions and maintenance for technical services.

1 High Pressure (HP) 7/16” outlets and 4 Low Pressure (LP) 3/8” outlets.

100% complete maintenance kit that includes precautionary spare parts and very low cost.

DIN weight 480 gr

Characteristics 1st stage

- 1 HP 7/16 UNF outlets

- 4 outlets MP 3/8 UNF

- Operating pressure: 300 bar (4350 psi) DIN version

- Calibration pressure: 9-10 Bar

- Nickel-plated brass body

- High-capacity conical filter in chemically nickel-plated spherical bronze

- Long-lasting AISI 316 steel piston

- Simplified calibration system

- Stainless steel calibration spring

- Quantity of supplied air: 2100 l/min

- Weight of the DIN version: 495 gr

HOMOLOGATION EN250/2000